QS Quanshun Motor 500W - 3000W 205 Electric Bicycle brushless Spoke DC Wheel Hub Motor

Product center

Home » PRODUCTS » QS E-Motorcycle Spoke Motor » QS 1000W-3000W 205 E-Scooter Spoke Hub Motor

QS Motor Spoke motor for Scooter Type 3000W 205 (50H) V2 in wheel Hub Motor: Price:US $230.00/piece; N.W.:13.5KG; G.W.:14.5KG; Dimension:34*34*33cm; Production Period:13~14 working days

Photo

Description

QS Motor Spoke motor for Scooter Type 3000W 205 (50H) V2 in wheel Hub Motor

It's QS electric In-Wheel Scooter Spoke Hub Motor for Conversion Kits, which power range from 500w to 3000w rated, drop-outs 200mm with scooter disc brake.

Especially suit for electric bicycle/scooter, max. speed for 60km/h to 100km/h.

You can click below picture for Aliexpress purchasing link

Key Features

1). Simplify to make a electric-scooter. Gearbox, transmission shaft, clutch are no need. Which save space.

2). It could be installed in the rear to save more space for battery.

3). Support regenerative braking

4). High efficiency: 85~92%

QS MOTOR 205 1000W-3000W E-Scooter Spoke Hub Motor List

205 e-scooter spoke

PS.1). Above quotation base on 205 electric spoke hub motor, 48V~96V.

2). Above configuration is suggested for mass production,

for EV enthusiast, V2 & V3 motor could be over-voltaged to gain more speed/performance (customizable).

Product description

Genearlly Spec:

Motor Type: BLDC Outer Rotor In-Wheel Hub Motor With Hall Sensor
Brand: QS Motor, QSMOTOR
Motor Design: Double axle without moped rim (integrated), 36 spoke holes, OD 4.2mm
Matching Rim Size: 24inch, 26inch E-Bike Wheel, 17inch, 18inch, 19inch moped wheel
Magnet Height: 50mm, 23 pole pairs
Stator: Aluminum Core
Rated Power: 3000W
Speed: 24KPH-80KPH, it's customized, genearlly we will design as 72V75KPH.
Work Voltage range: 48V-96V, will be 72V as default.
Max Torque approx 170.0N.m
KV: 9.3/11.1/15.1/16.7(optional)
Thermic Probe: KTY83-122 (as default, optional)
Max Efficiency approx 84%
Working Temperature: 70-120℃ , peak 150 ℃
Brake type: Disc brake (as default), PCD3*80mm for motorcycle
Drop-outs/Rear fork Width for installation: 200mm
Dual Halls with waterproof connectors(One for using, one for spare
12mm axle flats
10mm² Cross Section of Phase Wire(not including insulation layer)
Waterproof Grade: IP54
Color: Black (As default)
N.W/ G.W: 13.5kg/14.5kg