QS Motor 4000W 273 V2 BLDC Electric Car In Wheel Hub Motor
For 273 E-Car wheel hub motor, it could be used for electric scooter, tricycle, light car.
273 motor means the diameter of iron ring/hoop is 273mm, for all 273 motor, e.g. 13inch,14inch,16inch,17inch 273 e-scooter hub motor,
273 spoke hub motor, 13inch,14inch,16inch.17inch 273 single shaft hub motor, 273 E-car Hub motor etc., the configuration & performance is the same as 13inch 273 Hub Motor.
You can click below picture for Aliexpress purchasing link
New design disc brake cover 273 e-car motor
Standard disc is moped PCD:3*80mm, M8, it could be customized to be PCD:4*114.3mm, M12.
It's USD: 135.0 more per piece.
If the vehicle top speed is over 80KPH, then we suggest to use this new disc brake cover.
P.s.: The new mold is done, but the produce cost is quite high with T6 heat treatment.
1). Simplify to make a electric-car. Gearbox, transmission shaft, clutch are no need. Which save space.
2). It could be installed in the rear to save more space for battery.
3). Support regenerative braking
4). High efficiency: 85~92%
QS MOTOR 273 3000W-8000W E-Car Hub Motor List
PS.1). Above quotation base on 273 electric car hub motor, 48V~144V.
2). Above configuration is suggested for mass production.
3). We can customize the 14kW e-car hub motor, the production time will be long, around 45-50working days.
for EV enthusiast, V2 & V3 motor could be over-voltaged to gain more speed/performance (customizable).
Optional appearance, drawing, performance curve/test report are available.
If you need more technical information, please feel free to contact us.
We will give you reply in 12hours.
Conversion kits for 273 8kW E-Car hub motor
We're able to supply Controller, display, dc-dc converter, disc brake system, twist throttle...etc.
Application for E-Car hub motor