electric car motor,electric car motor kit,motor electric for car,electric car wheel motor,

Product center

Home » PRODUCTS » QS E-Car Hub Motor » QS 1000W-3000W 205 E-Car Hub Motor

QS Motor 1500W 205 40H V3 BLDC Electric Car Hub Motor for small e-car conversion 48V40KPH: Price:US $241.50/piece; N.W.:17.0KG; G.W.:18.75KG; Dimension:34*34*33cm; Production Period:12~13 working days

Photo

Description

QS Motor 1500W 205 40H V3 BLDC Electric Car Hub Motor for small e-car conversion 48V40KPH

For 205 E-Car wheel hub motor, it could be used for electric scooter, tricycle, mini/golf car.

205 motor means the diameter of iron ring of rotor is 205mm, for all 205 motor, e.g. 10inch & 12inch 205 e-scooter hub motor,

205 spoke hub motor, 10inch & 12inch 205 single shaft hub motor, 205 E-car Hub motor etc., the configuration & performance is the same as 10inch 205 Hub Motor.

You can click below picture for Aliexpress purchasing link

Optional Aluminium cover

1000X1000 (71)

Key Features

1). Simplify to make a light electric-car. Gearbox, transmission shaft, clutch are no need. Which save space.

2). It could be installed in the rear to save more space for battery.

3). Support regenerative braking

4). High efficiency: 85~92%

QS MOTOR 205 1000W-3000W E-Car Hub Motor List

205 e-car

PS.1). Above quotation base on 205 electric car hub motor, 48V~96V.

2). Above configuration is suggested for mass production.

for EV enthusiast, V2 & V3 motor could be over-voltaged to gain more speed/performance (customizable).

Product description

Genearlly Spec:

Motor Type: BLDC Outer Rotor In-Wheel Hub Motor With Hall Sensor
Brand: QS Motor, QSMOTOR
Motor Design: Single axle without moped rim (Integrated)
Matching Rim Size:12inch, 13inch & above wheel rim, CB ≥60mm,PCD ≤110mm(PCD 4*100mm, CB60mm as default)
Magnet Height: 40mm, 16 pole pairs
Stator: Aluminum Core
Rated Power: 1500W
Speed: 24KPH-70KPH, it's customized, genearlly we will design as 72V60KPH.
Work Voltage range: 48V-96V, will be 72V as default.
Max Torque approx 148.3N.m
KV: 9.6/10.8/11.6/12.5/13.5(optional)
Thermic Probe: KTY83-122 (as default, optional)
Max Efficiency approx 84%
Working Temperature: 70-120℃ , peak 150 ℃
Brake type: Moped Disc brake (as default), PCD: 3*80mm, CB: 58MM
Dual Halls with waterproof connectors(One for using, one for spare
12mm axle flats
6mm² Cross Section of Phase Wire(not including insulation layer)
Waterproof Grade: IP54
Color: Black (As default)
N.W/ G.W: 17.0kg/18.5kg